Dongguan Kingpo Technology Limited
Dongguan Kingpo Technology Limited
Add to Cart
IEC 60560 Figure 8 LED Light Testing Equipment For Non-Dimmable Lamp
IEC 60560 Figure 8 test equipment
IEC62560-1 Figure 8 Test Circuit For Non-Dimmable Lamp At Dimmer Or Electronic Switch
1. Use
Applying non-dimmable self-ballasted lamps on a dimmer or an electronic switch is to be tested as a possible case of abnormal operation..
2. Reference standards
IEC60560-Fig8
3. Technical parameters
| Internal dimension | 105 X 267 X220 W *D*H mm |
| 2 | potentiometer R1 |
| 3 | resistor R |
| 4 | Triac BTA16/700 |
| 5 | Diac DB3 |
| 6 | capacitor C1 = 100 nF |
| 7 | capacitor C2 = 68 nF to 150 nF |
| 8 | induction L1 = 3 mH |
| 9 | basic load, incandescent lamp P = 60 W |
| 11 | I r.m.s. Ammeter |
| Ammeter input Power | AC 220V 50Hz |
4.Test procedure:
Determine R1 and S1 setting at which the maximum I r.m.s . occurs.
Test at this situation, and if the lamp passively fails within 60 min, repeat the test at 10 % lower I r.m.s . The lower I r.m.s . shall be set in the decreasing potentiometer resistance direction.
Hot Tags: iec62560 test equipment, China, manufacturers, suppliers, factory, custom, wholesale, Lock Security Test Bench, Dielectric Strength Test Instrument, BS EN 13126 - 5 Figure A.2 Jointed Test Finger, Lamp Foot Twist Apparatus.jpg, Scratched Pin Electric Safety Testing Probes, IEC60529 IPX1 To IPX8 Test System